FEDERAL SUPPLY GROUPS
FSG 70 Automatic Data Processing Equipment (Including Firmware), Software, Supplies and Support Equipment
FSG 70 Automatic Data Processing Equipment (Including Firmware), Software, Supplies and Support Equipment excludes Software designed to Government specifications to satisfy the requirements of a particular user or for use with ADPE properly classifiable in an FSG other than FSG 70.
7010 ADPE System Configuration
Note-a group of general purpose analog, digital, or hybrid electronic or electromechanical
devices that are interconnected
to operate as a system.
Frequently referred to as an ADP system, although the term ″system″ is not considered definitive. Includes an assembly of
devices consisting of a central processing unit (CPU) and the necessary input/output devices, accessorial devices,
analog measurement devices,
software and/or firmware required to performthe
desired objectives. Also includes
sub-assemblies and units in which
input/output devices, CPUs, and/or accessorial
devices or components are incorporated
into a single assembly or unit.
A specially designed device incorporated
into a system shall not influence the classification
of the base assembly or unit.
7020 ADP Central Processing Unit (CPU, Computer), Analog
Note-An analog is a representation in one form of a physical condition existing in another form (e.g., the level of mercury in a tube represents temperature in a
thermometer; the angular position of a needle represents speed on a speedometer).
This class includes only CPUs that
accept as inputs the electrical equivalent of physical conditions such as flow, temperature,
pressure, angular position or
voltage and perform computations by manipulating these electrical equivalents to produce results for further use.
7021 ADP Central Processing Unit (CPU, Computer), Digital
Note-Digital refers to the representation of discrete numbers, symbols and alphabetic characters by a predetermined,
coded combination of electrical
impulses. This class includes only CPUs that accept information represented by digital impulses. Specifically, a device capable
of performing sequences of arithmetic and logic operations (a program) not only on data but also on the program which is contained in its internal memory (storage) without intervention of an operator.
7022 ADP Central Processing Unit (CPU, Computer), Hybrid Note-Hybrid refers to a combination of analog and digital capability as defined in Classes 7020 and 7021 with conversion capability required for intercommunication.
7025 ADP Input/Output and Storage Devices
Note This class includes devices used to control and transfer information to and from a Computer (as modified).The input
device is used for transferring data and instructions into a computer. The output device is used to transfer results of processing
by the computer to ADP peripheral
devices. Input/output devices combine the above functions in the same device. This class includes printers, display units, disk drive units (magnetic, optical
and floptical), tape drive units, terminals, data entry devices and transfer units. Also includes Optical Compact Disk (CD) devices used for the storage and
retrieval of data and firmware.
7042 Mini and Micro Computer Control Devices
Includes Mini or micro computers used as control mechanisms where computer technology is essential in controlling, monitoring, measuring, and directing processes,
devices, instruments or other
equipment.
Excludes Mini and micro computer control devices which are designed specifically for use in and/or integral to higher order systems, e.g., aircraft fire control
systems, numerically controlled machine tools, sequence controlled printing equipment,
motion measuring instruments, office information system equipment, and the like.
7040 Punched Card Equipment
Includes Collating machines, key punch machines, tabulating machines; verifiers;
reproducers; summary punches, sorters; interpreters.
Excludes Card actuated machines designed for use with an ADPE system.
7035 ADP Support Equipment
Note This class includes various devices and associated control units which are designed for use in combination or conjunction with an ADPE configuration but are not part of the configuration itself.
ADP support equipment includes magnetic tape testing, certifying, and cleaning equipment; disk pack testing, certifying and cleaning equipment; tape equipment,
rewinders, splicers, spoolers and card reconditioners.
Included in this class are
complete units and components of related general purpose commercially available support equipment which are not specifically designed for use as part
of a system such as a weapon system, control system, digital image processing system, missile system, communication
system or navigation system. Also included are support control systems and components not specifically designed for
use with process control such as automatic machine tool processing operations in which flow, pressure, temperature or other parameters are controlled by instrument
regulations in automatic machine
tool and process operations.
7030 ADP Software
Note-Software is a series of instructions or statements in a form acceptable to a CPU, designed to cause the ADPE configuration to execute an operation or
operations; or a collection of data in a form capable of being processed and operated
on by a computer.
Includes System programs, such as operating systems, assemblers, compilers, executive routines, interpreters, translators;
utility programs, such as sort/merge programs, media conversion, maintenance
diagnostic programs; and application programs, such as payroll, inventory control, and engineering analysis programs.
Excludes Software designed to Government specifications to satisfy the requirements
of a particular user or for use with
ADPE properly classifiable in an FSG
other than FSG 70. Also excludes operating manuals and programmers’ manuals properly classified in FSG 76.
7045 ADP Supplies
Note This class includes ADP tape seal bands, reels and hubs, carrying cases, canisters, and the like. Also includes all nonrecorded magnetic recording media designed to be used with ADP equipment, such as magnetic tape, removable disk packs, magnetic cards, cassettes, and diskettes. Also includes Optical Disks used for the storage of data.
7050 ADP Components
Note-This class includes ADP Component Assemblies that are parts of analog, digital or hybrid data processing devices.
Excluded from the class are items for which more specific classifications aresuitable. The FSC structure and indexes will govern the classification of those items permitted classification in a single
class only.
-
7025-00-091-0966
7025-00-091-0966 , TRANSPORT,MAGNETIC TAPE P/N:
-
7025-00-090-6809
7025-00-090-6809 , LEVER ASSEMBLY,PRINTER P/N:
-
7025-00-089-7613
7025-00-089-7613 , PRINTER,AUTOMATIC DATA PROCESSIN P/N:
-
7025-00-089-6256
7025-00-089-6256 , LAMP ASSEMBLY P/N:
-
7050-00-084-1803
7050-00-084-1803 , CONTROL ASSEMBLY,CO P/N:
-
7050-00-083-7524
7050-00-083-7524 , ADAPTER ASSEMBLY,TA P/N:
-
7050-00-083-7526
7050-00-083-7526 , COMPARATOR ANALOG P/N:
-
7025-00-083-7527
7025-00-083-7527 , RESISTOR TEST ADAPTER P/N:
-
7045-00-083-4234
7045-00-083-4234 , TAPE,ELECTRONIC DATA PROCESSING P/N:
-
7025-00-083-1968
7025-00-083-1968 , CROSS FEED CABLE ASSEMBLY P/N:
-
7045-00-082-8619
7045-00-082-8619 , COVER,COMPUTER P/N:
-
7040-00-081-1399
7040-00-081-1399 , PLATE,PRINTING P/N:
-
7040-00-081-1402
7040-00-081-1402 , UNIT ASSY,PRINTING P/N:
-
7025-00-081-1387
7025-00-081-1387 , HEAD ASSEMBLY,TYPE P/N:
-
7040-00-081-1350
7040-00-081-1350 , CONTACT ASSY,CONNEC P/N:
-
7035-00-081-1336
7035-00-081-1336 , ERASER,MAGNETIC P/N:
-
7025-00-081-1337
7025-00-081-1337 , BAIL ASSEMBLY,TAB P/N:
-
7040-00-081-1314
7040-00-081-1314 , SLEEVE,CLUTCH P/N:
-
7040-00-081-1311
7040-00-081-1311 , PLATE,MAGNET P/N:
-
7040-00-081-1308
7040-00-081-1308 , CONTACT ASSY,DRIVE P/N:
-
7040-00-081-1309
7040-00-081-1309 , CONTACT ASSY,DRIVE P/N:
-
7040-00-081-1310
7040-00-081-1310 , DRUM ASSY,PROGRAMIN P/N:
-
7025-00-081-1305
7025-00-081-1305 , CONTACT ASSEMBLY,MALE P/N:
-
7025-00-081-1306
7025-00-081-1306 , BAR,PULL P/N:
-
7040-00-081-1307
7040-00-081-1307 , STEM KEY P/N:
-
7040-00-081-1128
7040-00-081-1128 , CONNECTOR,RELAY CAR P/N:
-
7040-00-081-1129
7040-00-081-1129 , CONNECTOR,RELAY CAR P/N:
-
7040-00-081-1130
7040-00-081-1130 , PIVOT,GUIDE P/N:
-
7025-00-081-1127
7025-00-081-1127 , SPROCKET WHEEL ASSEMBLY P/N:
-
7025-00-081-1123
7025-00-081-1123 , CIRCUIT CARD ASSEMBLY P/N:
-
7025-00-081-1096
7025-00-081-1096 , CLUTCH,FEED P/N:
-
7025-00-081-1097
7025-00-081-1097 , WEIGHT ASSEMBLY,CARD P/N:
-
7025-00-081-1099
7025-00-081-1099 , STRAP ASSEMBLY,LATCH P/N:
-
7025-00-081-1093
7025-00-081-1093 , ROOL ASSEMBLY,FEED P/N:
-
7025-00-081-1094
7025-00-081-1094 , SHAFT ASSEMBLY,CLUTCH P/N:
-
7025-00-081-1095
7025-00-081-1095 , SHAFT ASSEMBLY,FEED P/N:
-
7025-00-081-1089
7025-00-081-1089 , ROOL ASSEMBLY,FEED P/N:
-
7025-00-081-1090
7025-00-081-1090 , YOKE AND COIL ASSEMBLY P/N:
-
7025-00-081-1092
7025-00-081-1092 , DISC ASSEMBLY,EMITTER P/N:
-
7025-00-081-1088
7025-00-081-1088 , SHAFT ASSEMBLY,COLLAR P/N:
-
7025-00-081-1078
7025-00-081-1078 , KNIFE ASSEMBLY,THROAT P/N:
-
7025-00-081-0969
7025-00-081-0969 , PERFORATOR,DIGITAL P/N:
-
7030-00-081-0909
7030-00-081-0909 , TAPE,PUNCHED PROGRAM P/N:
-
7035-00-079-7189
7035-00-079-7189 , DUAL DIGITIZER P/N:
-
7025-00-076-2251
7025-00-076-2251 , SHIFT REGISTER P/N:
-
7050-00-076-2155
7050-00-076-2155 , ENCODER P/N:
-
7050-00-075-9566
7050-00-075-9566 , CONVERTER,ANALOG TO DIGITAL P/N:
-
7035-00-075-6776
7035-00-075-6776 , KIT,INSTALLATION P/N:
-
7025-00-075-2597
7025-00-075-2597 , ROD P/N:
-
7045-00-063-5245
7045-00-063-5245 , CABINET,CONTROL PANEL STORAGE P/N:
-
7040-00-063-0581
7040-00-063-0581 , INACTIVE P/N:
-
7045-00-062-9966
7045-00-062-9966 , REEL TAPE P/N:
-
7010-00-045-7728
7010-00-045-7728 , CIRCUIT CARD ASSEMBLY P/N:
-
7040-00-045-4471
7040-00-045-4471 , GATE ARM ASSEMBLY P/N:
-
7025-00-032-7603
7025-00-032-7603 , INTERFACE UNIT,DATA TRANSFER P/N:
-
7025-00-032-7599
7025-00-032-7599 , ROD ASSEMBLY P/N:
-
7025-00-032-7592
7025-00-032-7592 , ROD ASSEMBLY P/N:
-
7045-00-032-7020
7045-00-032-7020 , PANEL ASSEMBLY P/N:
-
7025-00-032-6679
7025-00-032-6679 , TAPE ROLLER ASSEMBLY P/N:
-
7050-00-032-1278
7050-00-032-1278 , CONVERTER,DIGITAL TO ANALOG P/N:
-
7050-00-031-5381
7050-00-031-5381 , VACUUM CLEANER,TAPE P/N:
-
7050-00-031-5371
7050-00-031-5371 , CONTACT ASSEMBLY P/N:
-
7025-00-030-9962
7025-00-030-9962 , INSTALLATION KIT,ELECTRONIC EQUI P/N:
-
7025-00-030-6972
7025-00-030-6972 , CHASSIS,ELECTRICAL P/N:
-
7025-00-030-3438
7025-00-030-3438 , ROD ASSEMBLY,CARRIAGE HOUSING P/N:
-
7025-00-030-3339
7025-00-030-3339 , GUIDE,CARD P/N:
-
7025-00-030-3246
7025-00-030-3246 , ARM,BUFFER P/N:
-
7025-00-030-3256
7025-00-030-3256 , ARM,TENSION P/N:
-
7050-00-030-3269
7050-00-030-3269 , PANEL,SWITCH PLATE P/N:
-
7025-00-030-3052
7025-00-030-3052 , KIT,REEL BRAKE P/N:
-
7010-01-588-8378
7010-01-588-8378 , ASSY-01-ACE-2UMD-1 ASSY01ACE2UMD1 P/N: COMPUTER SET,DIGITAL
-
7025-00-019-7012
7025-00-019-7012 , ROLLER, BRIDGE ASSEMBLY P/N: 408461-2
-
7050-01-155-2009
7050-01-155-2009 , DIGITAL CONVERTER P/N: 406345-1
-
7025-01-593-3545
7025-01-593-3545 , CAPACITOR P/N: 406654
-
7025-01-140-6407
7025-01-140-6407 , PRINT HEAD AUTOMATI P/N: 403932
-
7021-01-247-0684
7021-01-247-0684 , INTERFACE, TERMINAL P/N: 363754-011
-
7021-01-166-7039
7021-01-166-7039 , COMPUTER, DIGITAL P/N: 3666-11-25
-
7025-01-152-9634
7025-01-152-9634 , CASSETTE,RIBBON,COM P/N: 37740008-2001
-
7045-00-225-2339
7045-00-225-2339 , SPINDLE P/N: 3148021
-
7045-01-040-4236
7045-01-040-4236 , HARNESS ASSEMBLY P/N: 3137986-02
-
7025-00-529-8474
7025-00-529-8474 , GUIDE,TAPE P/N: 3108321-10
-
7021-00-483-0051
7021-00-483-0051 , FAN,COMPUTER P/N: 352229008620
-
7025-01-343-0598
7025-01-343-0598 , TRANSPORT, MAGNETIC TAPE P/N: 348-0014943
-
7025-01-335-2394
7025-01-335-2394 , PRINTER SUBASSEMBLY P/N: 33439P
-
7025-01-112-4545
7025-01-112-4545 , HEAD ASSEMBLY P/N: 3300579-02
-
7025-00-898-7171
7025-00-898-7171 , HUB, TAKE UP, MOULDED P/N: 330150
-
7050-01-283-8079
7050-01-283-8079 , COMPUTER SUBASSEMBLY P/N: 29-24095-00
-
7045-01-119-1863
7045-01-119-1863 , HEAD,ARM ASSEMBLY P/N: 2820597
-
7025-01-093-4867
7025-01-093-4867 , ACTIVATOR ASSEMBLY P/N: 2820558
-
7025-00-510-3787
7025-00-510-3787 , LAMP ASSEMBLY,INCAN P/N: 3123515-01
-
7025-01-113-2444
7025-01-113-2444 , CABLE ASSY P/N: 30791-E00T
-
7025-01-137-4104
7025-01-137-4104 , HEAD , MAGNETIC P/N: 30148-003
-
7035-01-078-9766
7035-01-078-9766 , HEAD ASSY P/N: 31609001
-
7050-01-152-5198
7050-01-152-5198 , CAPSTAN TAPE DRIVE P/N: 3148916-01
-
7025-00-491-5592
7025-00-491-5592 , REGISTER MESSAGE CO P/N: 313070
-
7025-01-016-4938
7025-01-016-4938 , TERMINAL P/N: 310004-01
-
7025-00-491-1203
7025-00-491-1203 , MEMORY STACK ASSEMB P/N: 2685369-00
-
7025-00-009-0101
7025-00-009-0101 , INPUT STEP P/N: 26770
-
7025-00-464-9542
7025-00-464-9542 , SPOOL,TAPE HOLDER P/N: 2684430
-
7025-01-016-4951
7025-01-016-4951 , CONTROL PANEL ASSEM P/N: 30039002